First of all, we need to understand the basic structure of the manual binding machine. The Comb Binding Machine is built with its exquisite design and quality materials to ensure stability and durability over long periods of time. Next, we will follow the steps to explain how to use this binding machine.
1. Install the handle
Open the packaging of the Shirleyya manual binding machine and find the handle that came with the case. Put the handle on the right square shaft of the binding machine, pay attention to the working Angle of the handle, and ensure that the handle is firmly installed. Finally, the handle is firmly fixed to the machine with a locking screw.
2. Set the amount of paper used
When using Spiral Binding Machine, it must be determined according to the amount of paper specified in the manual of each model. Excessive use of paper can lead to problems such as tight grip, paper threading problems, or uneven margins. Therefore, it is important to follow the instructions in the manual to ensure that the amount of paper is within the allowable limits.
3. Adjust paper margins
The adjustment of paper margins is an important step in the binding process. According to the size of the pull ring diameter, we need to adjust the paper margin. With the Shirleyya manual stapler, the margins can be set by adjusting the screw (usually located at the back of the stapler). Generally speaking, when the diameter of the pull ring is large, the margin of the paper should be increased accordingly; When the diameter of the drawing ring is small, the margin of the paper should be reduced accordingly.
4. Drilling operation method
① Tidy up the paper to be bound and ensure that the edge of the paper is closely fitted with the positioning block. The paper is then fed into the Shirleyya manual binder in parallel to ensure that the top of the paper is in place.
② Press the paper with your left hand, hold the handle with your right hand, and press the handle down until the blade penetrates the paper. Be careful to keep your hands steady during operation to avoid shifting or curling the paper.
③ When the blade penetrates the paper, lift the handle slowly. At this point, both hands smoothly take the typed paper out of the machine. If there is a hanging paper phenomenon, repeat the above steps can be easily resolved.
5. Loop binding method
According to the amount of paper, select the appropriate size of the pull ring. Push the handle of the manual binder up slowly until the pull ring is open. Then, insert the paper holes into the drawing ring, making sure the holes are aligned. Then, slowly pull the handle back so that the pull ring teeth are all inserted into the paper hole. Finally, pull the handle into place, tighten the loop, and a neat and beautiful binding is complete.
By following the above steps, you will be able to easily complete various Binding tasks using the Shirleyya Calendar Binding Machine. Whether it is bills, documents or other paper materials that need to be bound, manual binding machines provide you with an efficient and reliable solution.